Bottom Rollers for Compact Track Loader
Takeuchi TL10 Bottom Rollers
Replacement bottom rollers for Takeuchi TL10 compact track loaders. Support and distribute machine weight across the track. Wholesale pricing with fast shipping from our Houston warehouse.
Researched Part Numbers for Takeuchi TL10
Research-Based Fitment Data: The following part numbers have been researched for compatibility with Takeuchi TL10 compact track loaders. Part numbers and fitment vary by serial number range.Please call 346-438-6252 with your machine serial number to confirm exact fitment before ordering.
Research-Based Fitment — Call to Confirm
06813-00038
bottom roller
Takeuchi 06813-00038 Bottom Roller
Primary Part Number
06813-00038
Compatible Machines
Takeuchi TL10V2, TL6, TL8R2 Triple flange rollers
Mount Type / Chassis Notes
TRIPLE-FLANGE bottom roller specifically for the R2/V2-generation TL6/TL8R2/TL10V2 track loaders. IMPORTANT: triple-flange R2/V2 rollers are NOT interchangeable with the original-series double-flange rollers (e.g. 08801-30000) - confirm generation before ordering.
Serial Number Specific
Confirm the machine is the R2/V2 generation (triple flange) and verify serial before ordering.
Research-based fitment data. Please call with your machine serial number to confirm compatibility before ordering. Part numbers and fitment may vary by serial range.
346-438-6252 • Houston, TX
Research-Based Fitment — Call to Confirm
881130500
bottom roller
Takeuchi TL10 / TL12 / TL240 / TL250 Bottom Roller 881130500
Primary Part Number
881130500
Alternate / Interchange Numbers
Supersession / Interchange Notes
RubberTrax machine-family pages reference related drive sprockets 881160110 / 08821-60010, idler 08811-40300, front roller 08811-31300.
Compatible Machines
Takeuchi TL140, TL150, TL10, TL12, TL240, TL250
Mount Type / Chassis Notes
Bottom track roller down the center of Takeuchi TL undercarriage; front roller and idler are separate parts.
Serial Number Specific
No specific serial break extracted; verify by model and serial before ordering.
Research-based fitment data. Please call with your machine serial number to confirm compatibility before ordering. Part numbers and fitment may vary by serial range.
346-438-6252 • Houston, TX
Research-Based Fitment — Call to Confirm
08811-30500
bottom roller
Takeuchi TL10 / TL12 Bottom Roller 08811-30500
Primary Part Number
08811-30500
Compatible Machines
Takeuchi TL10, TL12, TL140, TL150, TL240, TL250 (generation 1) track loaders. NOT the V2 series.
Mount Type / Chassis Notes
Bottom (center) roller for the generation-1 TL10/TL12 undercarriage. NOT interchangeable with the V2 series. Pairs with drive sprocket 08811-60110.
Serial Number Specific
Confirm gen-1 (TL12), not TL12V2, before ordering.
Research-based fitment data. Please call with your machine serial number to confirm compatibility before ordering. Part numbers and fitment may vary by serial range.
346-438-6252 • Houston, TX
About Bottom Rollers for Takeuchi TL10
Bottom rollers (also called track rollers or lower rollers) are mounted along the track frame and roll against the inside of the rubber track. They carry the entire weight of the machine and distribute it evenly across the track, reducing point loading and premature track wear.
Each roller contains sealed bearings and lubricant that allow smooth rotation under heavy loads. The outer shell is typically hardened steel designed to resist wear from abrasive materials like sand, gravel, and debris.
Quality bottom rollers feature double-sealed or triple-sealed bearings to prevent contamination and extend service life. The seal design is critical in harsh environments where mud, water, and fine particles can compromise bearing function.
How Bottom Rollers Work
Bottom rollers ride along the inside of the track, supporting the machine's weight while allowing the track to move freely. They maintain track alignment and prevent the track from contacting the track frame. As the track rotates, the rollers spin on their bearings, distributing load and reducing friction.
Signs You May Need Replacement Bottom Rollers
Regular inspection of your bottom rollers can prevent costly track damage and downtime. Watch for these warning signs that indicate replacement may be needed:
•Flat Spots or Uneven Wear
Visible flat spots on the roller surface indicate bearing failure or seized rotation. This causes the roller to slide rather than roll, damaging both the roller and the track inner surface.
•Wobbling or Excessive Play
Side-to-side movement or bearing play causes track misalignment and uneven wear. This often indicates worn bearings or internal damage that will worsen rapidly.
•Leaking Seals or Oil Weeping
Oil around the roller face or shaft indicates seal failure. Without proper lubrication, bearings will fail quickly, often within hours of continued operation.
•Grinding or Unusual Noise
Metallic grinding, squealing, or rumbling during operation suggests bearing damage or debris contamination. Stop operation and inspect immediately to prevent further damage.
•Track Derailment or Walking
Worn rollers lose their ability to guide the track properly, leading to the track walking off to one side or complete derailment. This can cause significant damage to the track and undercarriage.
•Premature Track Wear
If your tracks are wearing faster than expected, damaged bottom rollers may be causing uneven contact or increased friction. Replacing worn rollers can significantly extend track life.
Fitment Verification
Bottom roller specifications can vary by serial number, production year, and undercarriage configuration. Some machines have solid-mount rollers while others use suspension-mount designs.
Always verify your machine's serial number before ordering. Our team can cross-reference your serial to confirm the correct roller style, mounting pattern, and quantity.
If you are unsure about roller specifications, contact us with your machine serial number and we will confirm exact fitment at no charge.
Free Fitment Verification
Not sure which bottom roller fits your Takeuchi TL10? Contact us with your serial number and we will verify the correct part at no charge.
Related Takeuchi TL10 Parts
Complete your undercarriage maintenance with these related components for your Takeuchi TL10.
Compatible Rubber Track Sizes for Takeuchi TL10
Find the correct rubber track size for your Takeuchi TL10. Always verify with your serial number for accurate fitment.
Get a Quote for Takeuchi TL10 Bottom Rollers
Contact us with your machine details for competitive wholesale pricing. Include your serial number for accurate fitment verification.
Get wholesale pricing on rubber tracks and undercarriage parts. We respond within 2 business hours.
Frequently Asked Questions About Takeuchi TL10 Bottom Rollers
Why Choose Rubber Track Wholesale?
- Wholesale Pricing
Competitive pricing direct from our Houston warehouse
- Fast Nationwide Shipping
Same-day shipping on in-stock items
- Expert Support
Knowledgeable staff to help with fitment and selection
- Quality Assurance
Premium components meeting OEM specifications