Bottom Rollers for Mini Excavator
Kubota KX080-4S2 Bottom Rollers
Replacement bottom rollers for Kubota KX080-4S2 mini excavators. Support and distribute machine weight across the track. Wholesale pricing with fast shipping from our Houston warehouse.
Researched Part Numbers for Kubota KX080-4S2
Research-Based Fitment Data: The following part numbers have been researched for compatibility with Kubota KX080-4S2 mini excavators. Part numbers and fitment vary by serial number range.Please call 346-438-6252 with your machine serial number to confirm exact fitment before ordering.
Research-Based Fitment — Call to Confirm
RD809-21703
bottom roller
Kubota KX080-3 / KX080-4 Bottom Roller RD809-21703
Primary Part Number
RD809-21703
Alternate / Interchange Numbers
Compatible Machines
Kubota KX080-3, KX080-3T, KX080-4, KX080-4S, KX080-5 mini excavators. Approx 26 lbs.
Mount Type / Chassis Notes
Bottom roller runs down the center of the undercarriage. Length approx 9 in, outer diameter approx 4-3/4 in, shaft diameter approx 1-5/8 in, weight approx 26 lbs. Ships assembled.
Serial Number Specific
Verify exact KX080 sub-model from the serial plate before ordering.
Research-based fitment data. Please call with your machine serial number to confirm compatibility before ordering. Part numbers and fitment may vary by serial range.
346-438-6252 • Houston, TX
About Bottom Rollers for Kubota KX080-4S2
Bottom rollers (also called track rollers or lower rollers) are mounted along the track frame and roll against the inside of the rubber track. They carry the entire weight of the machine and distribute it evenly across the track, reducing point loading and premature track wear.
Each roller contains sealed bearings and lubricant that allow smooth rotation under heavy loads. The outer shell is typically hardened steel designed to resist wear from abrasive materials like sand, gravel, and debris.
Quality bottom rollers feature double-sealed or triple-sealed bearings to prevent contamination and extend service life. The seal design is critical in harsh environments where mud, water, and fine particles can compromise bearing function.
How Bottom Rollers Work
Bottom rollers ride along the inside of the track, supporting the machine's weight while allowing the track to move freely. They maintain track alignment and prevent the track from contacting the track frame. As the track rotates, the rollers spin on their bearings, distributing load and reducing friction.
Signs You May Need Replacement Bottom Rollers
Regular inspection of your bottom rollers can prevent costly track damage and downtime. Watch for these warning signs that indicate replacement may be needed:
•Flat Spots or Uneven Wear
Visible flat spots on the roller surface indicate bearing failure or seized rotation. This causes the roller to slide rather than roll, damaging both the roller and the track inner surface.
•Wobbling or Excessive Play
Side-to-side movement or bearing play causes track misalignment and uneven wear. This often indicates worn bearings or internal damage that will worsen rapidly.
•Leaking Seals or Oil Weeping
Oil around the roller face or shaft indicates seal failure. Without proper lubrication, bearings will fail quickly, often within hours of continued operation.
•Grinding or Unusual Noise
Metallic grinding, squealing, or rumbling during operation suggests bearing damage or debris contamination. Stop operation and inspect immediately to prevent further damage.
•Track Derailment or Walking
Worn rollers lose their ability to guide the track properly, leading to the track walking off to one side or complete derailment. This can cause significant damage to the track and undercarriage.
•Premature Track Wear
If your tracks are wearing faster than expected, damaged bottom rollers may be causing uneven contact or increased friction. Replacing worn rollers can significantly extend track life.
Fitment Verification
Bottom roller specifications can vary by serial number, production year, and undercarriage configuration. Some machines have solid-mount rollers while others use suspension-mount designs.
Always verify your machine's serial number before ordering. Our team can cross-reference your serial to confirm the correct roller style, mounting pattern, and quantity.
If you are unsure about roller specifications, contact us with your machine serial number and we will confirm exact fitment at no charge.
Free Fitment Verification
Not sure which bottom roller fits your Kubota KX080-4S2? Contact us with your serial number and we will verify the correct part at no charge.
Related Kubota KX080-4S2 Parts
Complete your undercarriage maintenance with these related components for your Kubota KX080-4S2.
Get a Quote for Kubota KX080-4S2 Bottom Rollers
Contact us with your machine details for competitive wholesale pricing. Include your serial number for accurate fitment verification.
Get wholesale pricing on rubber tracks and undercarriage parts. We respond within 2 business hours.
Frequently Asked Questions About Kubota KX080-4S2 Bottom Rollers
Why Choose Rubber Track Wholesale?
- Wholesale Pricing
Competitive pricing direct from our Houston warehouse
- Fast Nationwide Shipping
Same-day shipping on in-stock items
- Expert Support
Knowledgeable staff to help with fitment and selection
- Quality Assurance
Premium components meeting OEM specifications